Backflow Prevention and Testing in Tapping Perth
What is Backflow, does it affect my business in Tapping?
Backflow occurs when the water pressure of your home or business property plumbing drops below the pressure at the mains. This causes the water in your supply pipes to flow in the wrong direction. As a result, the water is flowing back into the water supply pipes, which can mix pollutants with the freshwater. Once the water has been contaminated in your Tapping property it can cause serious sickness or death.
This means that it is required for properties to have a backflow prevention device and industrial areas have to have theirs regularly maintained and tested.
Backflow issues can affect any business or property in Tapping. There are a variety of causes for backflow to occur such as a burst or ruptured water main, an excessive demand during a fire-fighting operation, a cross-connected bore pump system with the internal water plumbing system.
One of the ways Backflow of pollutants can be prevented is through the installation of an averting-valve, a one-way device that stops water moving backwards through the pipes.
These devices (in industrial areas) are legally required to have regular maintenance and testing to ensure they are operating correctly and their effectiveness has not deteriorated due to age or wear.
We Offer Backflow Testing In Tapping
For all Commercial and industrial properties that have Restricted Pressure Zone Device (RPZD) system installed, the Water Corporation requires testing to be carried out every 12 months on the system by an accredited Back Flow Testing agent, using a calibrated testing device.
The fully qualified plumbers at Universal Plumbers can test and repair all backflow prevention devices for your Tapping property.
There are three common backflow prevention device’s used in Tapping, these include:
- Break tank, which creates an air gap that separates the incoming water supply from the downstream water system and an overflow that sits below the level of the air gap.
- Reduced pressure zone backflow protection device, this device has two independent acting non-return values. This means that water flow through the device will only happen with the pressure that can depress the valve springs opening the valve. The relief valve is located between the non-return valves and opens to the atmosphere under conditions of backflow.
- Double-check backflow protection device, these devices use 2 independently operated spring-loaded, non-return valves in series. Flow-through the device will only occur when there is sufficient pressure to overcome the valve springs.
Our experienced plumbers can provide a risk assessment for the potential for backflow on the property. After this, we will be able to provide an estimate of what is required to ensure that you have safe, fresh, and clean water and avoid contamination from backflow. By identifying the backflow risk rating at your property Universal plumber’s can determine the best type of backflow prevention device or system for your Tapping property.
While testing the backflow prevention system in Tapping the water will be required to be turned off. Our plumbers will work with you to determine the best time to reduce any inconvenience and ensure that the water is turned off for the shortest time possible.
Businesses within industrial and commercial areas such as Osborne Park, Malaga, Wangara, Joondalup, and Balcatta should ensure that their backflow system or device is correctly installed and maintained by calling us for a low-cost backflow test.
If you would like to find out more about backflow or would like to book in our backflow prevention and testing service in Tapping contact us on 0412 919 777 or fill out our enquiry form here.
Other plumbing services we provide in Tapping:
- Burst Pipes Repairs
- Hot Water System Replacement
- Blocked Drains Clearing
- Experienced Bathroom Renovation Plumbing Services in Tapping
- We Offer Fast Emergency Plumbing for Tapping
Local business services we recommend:
- CCTV Camera Installation in Tapping
- Tapping Home Renovations and Additions
- Devrite Award Winning Homer Builder Tapping
- Home Innovation 2 Storey Builders Tapping
- Mobile Bookkeeping Services Tapping
- Decking Installation Tapping
So again if f you would like to get a quote for your backflow testing in Tapping, then contact us on 0412 919 777 or fill out our enquiry form here.